:: ham and eggs from frgo ::

... yes, it's done. As announced in my other blog post I was working on the Hamlib Backend for the ADT-200A- it now is ready. The implemented capabilities available are: Caps dump for model: 2901 Model name: ADT-200A Mfg name: ADAT www.adat.ch Backend version: 1.36 Backend copyright: Frank Goenninger, DG1SBG. License: Creative Commons Backend status: Beta Rig type: Transceiver PTT type: Rig capable DCD type: None Port type: RS-232 Serial speed: 115200..115200 bauds, 8N1 Write delay: 0ms, timeout 250ms, 3 retry Post Write delay: 20ms Has targetable VFO: N Has transceive: N Announce: 0x0 Max RIT: -9.999kHz/+9.999kHz Max XIT: -9.999kHz/+9.999kHz Max IF-SHIFT: -0.500kHz/+0.500kHz Preamp: 5dB 10dB Attenuator: 5dB 10dB 15dB 20dB 25dB CTCSS: None DCS: None Get functions: NB VOX NR Set functions: NB VOX NR Get level: PREAMP(0..0/0) ATT(0..0/0) AF(0..0/0) NR(0..0/0) CWPITCH(0..0/0) RFPOWER(0..0/0) MICGAIN(0..0/0) KEYSPD(0..0/0) METER(0..0/0) BKIN_DLYMS(

Dear fellow OMs! I have been busy the last few days creating a new Hamlib backend for the ADAT ADT-200A  transceiver. This transceiver is the best one currently available for a hobbyist budget. I really can recommend this TRX for any ambitious radio amateur. A missing piece was the support of Hamlib for the ADT-200A. Well, Winter holidays are a perfect time to just sit down and implement this - so I did. The software will be released in a few days ... Just for a teaser here's a screenshot of an interactive session with rigctl (the control application of Hamlib): Terminal session on Mac OS X, connected to an ADAT ADT-200A via Hamlib 1.2.14 The session shows that there is a ADT-200A with Serial Nr 1004079 connected that has loaded Firmware version 1.36bg (This firmware version will soon be released - please be patient - final testing is happening these days). Huge thanks go to Hans, HB9CBU, the inventor of the ADAT ADT-200A. OM Hans helped me answer endless questions